Featured

AAP Inline Spring & Swing Check Valves

Check Valves are used to ensure the flow direction in water, air and gas applications to prevent backflow in a piping system. The two most common styles of check valves are 'Spring' and 'Swing' Check Valves. Inline Spring and Swing Check Valves are used in a wide range of industries including Water, Air, Pumping as examples.

From a 10mm Inline Spring Check Valve to a 100mm Inline Swing Check Valve – AAP Industries have a range to look after your requirement’s and for the different applications.

AAP Peal® Pipe Pieces & Barrel Nipples

Black, Galvanised, Mild Steel and Stainless Steel Fittings. Convenient, easy to use, cost-effective and labour-saving pipe pieces, barrel nipples and close nipples – to be used as a pre-made replacement piece, extension, or repair piece of pipe to screw into new or existing pipelines. This reduces the labor costs in cutting and threading pipe – no threading machines needed.

AIP All Stainless Steel Permanent Repair Clamps

Designed for easy installation – why go to the expense of digging up and replacing a split pipe when you can simply use AIP All Stainless Steel Permanent Repair Clamps – saving you man power, time and money.

AIP Travelflex® & Powaflex® Irrigation Hose

Travelflex® and Powaflex® are premium quality irrigation hose designed for use with travelling irrigators. Designed and manufactured tough for Australian conditions.

Clearbore Water Bore & Water Pump Cleaner

Clearbore is a biodegradable granular chemical designed to remove the blockage of biofilm and hard encrustations that result from dissolved iron and iron-related bacteria. Clearbore will dissolve the blockage simply and easily and allow the pump to return to normal operation within hours. 

Clearbore is the simplest and most economical way to clean your water bore and pump. It is safe and simple to apply, becoming biodegradable soon after use.

Iplex Nortite™ Ductile Iron Socket Fittings

The Nortite range of Ductile Iron Socket Fittings is ideally suited to any application where AS/NZS1477 Series 1 UPVC pipe is to be used as the parent pipeline.

Iplex PVC-U Pressure Pipe & Fittings

Performance Under pressure – Iplex PVC-U Pressure Pipes and Fittings (Un-plasticised) have been trusted for decades in critical irrigation, water supply and sewerage pipelines. Iplex provides a comprehensive range of PVC-U Pipes and Fittings for your irrigation needs. PVC-U is an engineered product with a high strength to weight ratio enabling lightweight fittings that are easy to handle and are ideal for pressure pipelines.
 

Iplex® BlackMAX® Stormwater Pipes & Fittings

Iplex® BlackMAX® is a cost-effective alternative to rigid stormwater drainage pipes providing exceptional performance and durability. Manufactured from polypropylene, BlackMAX® pipes are resistant to corrosive and aggressive ground conditions, such as acid sulphate soils or saline ground waters; resulting in increased longevity of the pipeline.

The profile wall structure provides an efficient use of material, producing a pipe with high ring stiffness and low mass. As a result, Iplex BlackMAX pipes and fittings are only a fraction of the weight of conventional materials and can readily withstand both installation and service loads.

• Proudly manufactured in Australia
• Built to last
• Efficient water movement
• Easy installation
• Safer to use

K-Line® Pod Irrigation Systems

K-Line Irrigation is a revolutionary, specially formulated, flexible tubing line and pod sprinkler system designed to reduce the time and money you spend on irrigation installation, operation and repairs. Easily installed, a perfect DIY project.

K-Line Irrigation is a moveable, low-pressure irrigation system designed to reduce the time and money you spend on irrigation installation, operation and repairs. Its low application rate means virtually no water run-off and better water penetration into the soil leading to improved crop growth. K-Line Irrigation uses less water more effectively.

NDS Telescopic Pro Span Couplings

NDS Telescopic Pro Span Couplings have an innovative design to make installation easier and lasting. They come in sizes from 15mm up to 100mm to ensure you have a fitting for every application. With an impressive pressure rating above the competition, it should be the only fitting on your mind when thinking of PVC telescopic.

NORMA® Rural Telescopic Pipe Compression Fittings

Manufactured with a high level of quality for product peace of mind. These fittings are UV stabilised to ensure they will continue to perform, even in harsh sunlight conditions, and are the ideal connection for repairing and tapping into rural PE pipe. NORMA® Rural Telescopic Compression Fittings are easily identified as a rural compression fitting by having green ends. These ends are also interchangeable with the NORMA metric fittings. There are a large range of sizes and configuration to cover most types of installation.

Philmac BSP Threaded Fitting Range

Philmac BSP Threaded Fittings provide precision BSP tapered threads that have been engineered to maximize sealing performance. The versatile range is made from high performance, UV resistant polypropylene that does not absorb moisture. Installation is quick, simple and reliable every time. The fittings are also Watermark and potable water (AS/NZ 4020) approved, so are suitable for a wide range of plumbing applications. Philmac BSP Threaded Fittings provide maximum versatility, delivering a high performance connection across a wide range of pressure ratings and chemical combinations*. The hexagonal body makes them extremely simple to install.

Importantly, Philmac BSP Threaded Fittings are available in a wide range of sizes and are suitable for working pressures up to
• PN16 (1600 kPa, 235 psi) for sizes up to 2”
• PN12 (1200 kPa, 175 psi) for 2-1/2” and
• PN10 (1000 kPa, 145 psi) for 3” and 4” sized fittings.

Philmac Connections for Rural B Pipe

Philmac Rural Compression Fitting Range has been manufactured from high performance advanced thermoplastic materials so it is resistant to corrosion and has the strength and durability for many years of service.

Backed by a 20 year warranty, the Philmac Rural compression fitting is a product of Philmac’s unrelenting commitment to continuous improvement and a culture based on innovation and ingenuity.

Philmac EasyLOK™ Metric Fitting Range

Philmac EasyLOK fittings have been designed to ensure that installation is as easy as possible and that it works everytime. When working with large pipes, installation can be challenging but Philmac EasyLOK fittings make light work of large pipe connection.

Philmac Large Bore Threaded Fittings

Philmac now provides a complete range of Large Bore Threaded Fittings from 1/8” to 4”*. The range from 1/2” to 2” carries an Australian Watermark approval and is pressure rated to PN16. The 2-1/2” fitting range are rated to PN12 and the 3” and 4” fittings are rated to PN10. (*1/8” to 3/8” from external supplier).