Featured

AAP appFLO Brass Ball Valves

Whether you need a General Purpose Brass Ball Valve through to an approved DR Brass Ball Valve you'll find an appFLO Ball Valve that will have your requirements covered.

AAP appFLO Butterfly Valves – Wafer, Lugged, Gear-Op

Butterfly Valves are used in a wide range of industries including water, wastewater treatment, food processing, HVAC, petrochemical as examples – offering a compact profile and give a bubble tight shut-off as well as having good regulating capabilities. Butterfly Valves are very useful where you have limited space and can utilise a quicker action – ¼ turn control to stop, start or regulate flow, rather than multi-turn gate valves. AAP offers Butterfly Valves with a range of body and seat options from Cast, Stainless Steel (SS), Ethylene Propylene Diene Monomer (EPDM), Nitrile Butadiene Rubber (NBR) or Viton® Seats. You are sure to find a material to suit your requirements.

AAP appFLO Green Handle Poly Ball Valves

Range of appFLO Green Handle Polypropylene Ball Valves come in a range of sizes from a ½ - 2” female BSP thread, and  incorporating a special feature unmatched by its competitors – the shaft is fitted with 2 O-rings of differing materials (EPDM and NBR).

Suitable to use in a wide range of industries including Water, Air, Chemicals, and Pumping.

AAP appFLO Resilient Seat Gate Valves

Resilient Seat Gate Valves are Gate Valves with an elastomer lined wedge. They are especially used for waste water, drinking water supply and irrigation. Also known as RSGV or RSG Valves, Resilient Seat Gate Valves have plain valve bottoms, allowing free passage for sand and pebbles in the valve. AAP appFLO Resilient Seat Gate Valves are availble in a wide range of sizes.

AAP Camlock (Cam & Groove) Fittings

AAP Camlock (Cam & Groove) Fittings to cover all your irrigation needs. Aluminium, Brass, Poly, Gal Mal, Stainless or NyGlass – we've got the fitting for you.

AAP Inline Spring & Swing Check Valves

Check Valves are used to ensure the flow direction in water, air and gas applications to prevent backflow in a piping system. The two most common styles of check valves are 'Spring' and 'Swing' Check Valves. Inline Spring and Swing Check Valves are used in a wide range of industries including Water, Air, Pumping as examples.

From a 10mm Inline Spring Check Valve to a 100mm Inline Swing Check Valve – AAP Industries have a range to look after your requirement’s and for the different applications.

AAP Peal® Pipe Pieces & Barrel Nipples

Black, Galvanised, Mild Steel and Stainless Steel Fittings. Convenient, easy to use, cost-effective and labour-saving pipe pieces, barrel nipples and close nipples – to be used as a pre-made replacement piece, extension, or repair piece of pipe to screw into new or existing pipelines. This reduces the labor costs in cutting and threading pipe – no threading machines needed.

AAP Storz Fittings

Storz Fittings are fire hose fittings that feature interlocking hooks and flanges. Storz Fittings are widely used to connect hoses to fire hydrants, tanks and fire pumps that deliver water to fire sprinklers. Storz couplings attach quickly and reliably using a push, twist, and lock technique.

Since its invention in 1882 Storz Fittings have been widely emloyed on fire outlets including pumps, tanks, hoses and hydrants in a across a range of firefighting applications. Storz Fittings are the standard coupling for fire outlets in a number of countries, including Australia.

AIP All Stainless Steel Permanent Repair Clamps

Designed for easy installation – why go to the expense of digging up and replacing a split pipe when you can simply use AIP All Stainless Steel Permanent Repair Clamps – saving you man power, time and money.

Antelco Drippers / Adjustable Flow – Shrubbler® & Potstream®

Antelco Shrubbler® and Potstream® Adjustable Flow Drippers are ideal for home garden and light commercial use.

Antelco Green Back® & Purple Back® Valves

Antelco’s range of Green Back® and Purple Back® Valves — designed and manufactured in Australia; built for quality. Antelco Green Back® and Purple Back® Valves are a simple on/off valve device to control the water flow in low pressure irrigation systems.

Green Back® and Purple Back®
Easily identifiable by their distinctive Green and Purple (for recycled water use only) button tops, these valves feature a large rounded top, ergonomically designed to fit comfortably in your hand making them easy to turn for on/off operation.

Antelco Pressure Compensating (PC) Drippers

A range of quality Pressure Compensating (PC) drippers that deliver a precise amount of water over a wide range of operating pressures. PC drippers facilitate controlled watering, as each dripper performs to a pre-set flow rate, allowing water emitted over a length of time to be easily calculated. This ensures more efficient watering, reducing the risk of over-watering or under-watering.

Antelco Rotor Max™ 180º Deflector

Easy Snap-on Field Fitted 180º Deflector for use with Antelco Rotor Max™ Midi Sprinklers. Ideally suited to end-of-row-sprinkler installations or to prevent overspray on roads and driveways, pathways, nursery walk-ways – or any application that requires directional water distribution. UV stabilsed materials ensure long life.

Antelco Rotor Mini & Midi Sprinklers

Antelco’s range of Rotor Sprinklers are ideal for greenhouses, nurseries, landscaping, home gardens and horticultural and agricultural applications. Available in three sprinkler ranges: Antelco Rotor Spray™ Mini; Antelco Rotor Rain® Mini; and Antelco Rotor Max™. 

Antelco Sprays - Spectrum™ 360º Adjustable Spray

Antelco Spectrum™ 360º Adjustable Sprays – adjustable flow, full circle vortex sprayers with fine water droplets. Flow and coverage can be easily altered by rotating the click-indexed cap. Features include finger-tip click-indexed flow control with shut-off option. UV stabilised materials to ensure long operational life.

Antelco Sprinklers / Agriculture – Rotor Rain® Plus Mini Sprinkler

Antelco Rotor Rain® Plus High Performance Mini Sprinklers – part of a range of undertree and overhead mini sprinklers for horticultural and agricultural applications.

Antelco Super Tough ST Fittings

Antelco Super Tough ST Fittings are approximately double the strength of current single-barb polypropylene (PP) fittings and provide a better solution for vineyard, orchard and other agricultural installations. Suitable for most dripline configurations. UV stabilised. Based on proven single-barb fittings design.

Apex® Dual Level Reservoir Valve

The Dual Level Apex® Reservoir Valve is a full flow acetyl sleeved valve, designed for fast filling of reservoirs and large header tanks. The dual levers allow the minimum and maximum water levels to be set to reduce pump run cycles, which saves electricity and increases the life of a pump.

Apex® XtraFlo® Trough Valve

The Apex XtraFlo® Armless Trough Valve is a compact diaphragm valve that is used for filling large troughs with a high flow demand. The armless design reduces the possibility of stock damage when compared with conventional brass arm valves.

Baccara Geva Solenoid Latch Valve G75-A3P

The next generation of solenoid latch valve with manual override. The large orifice size facilitate a faster actuation on hydraulic systems like large irrigation valves and improves flushing time on filtration systems. The unique manual override mechanism guarantee a safer manual actuation with three positions (Open/Auto/Closed).

Baccara G75-A3P Solenoid Latch Valves have the flexibility to be used on many controllers and systems. Great flow and easy to set up and mount.