Puretec® TankSafe™ Rainwater Tank Purifier

Puretec® TankSafe™ Rainwater Tank Purifier

Puretec® TankSafe™ Rainwater Tank Purifier

Puretec® TankSafe™ – An innovative product that can kill up to 99.9% of all germs, bacteria and viruses in your stored water.

Drinking untreated water can be unsafe and lead to illness. TankSafe™ is an alternative to dosing with chlorine. It is tasteless, odourless and chlorine free, designed specifically for tank water disinfection. TankSafe™ is low cost and non-toxic. TankSafe™ will stay in your tank and keep it protected from bacteria and pathogens for up to 2 months.

Why treat your tank water?
Unfortunately, whilst rainwater starts out pristine, it is quickly contaminated – and by the time it reaches our taps it is often unsafe to drink because micro-organisms from animal and bird droppings, decaying vegetable matter and dirt can contaminate the water. There are always low levels of bacteria in tank water and if left without treatment these levels can get out of control – you get smelly, stagnant water which is unsafe to drink.

What makes Puretec® TankSafe™ the right solution for you?
TankSafe™ is an alternative to dosing with chlorine. It is tasteless, odourless and chlorine free, designed specifically for tank water disinfection. TankSafe™ is low cost and nontoxic. While most chemicals used for water disinfection are toxic (some are even known carcinogens), TankSafe™ will stay in your tank and keep it protected from bacteria and pathogens for up to 2 months.

Advice. Products. Solutions. Australia-wide. Locally source and buy Puretec®TankSafe™ and other Puretec® products from the leaders in pumping, irrigation, filtration, water and fluid management – Irrigear® Independent Experts.

  • For all types of stored water & carted water
  • Kills 99% of germs, bacteria & viruses
  • TankSafe™ is tasteless, odouless & chlorine free
  • Lowcost & nontoxic
  • Easy to use
Puretec® TankSafe™ Rainwater Tank Purifier
Explore Puretec® Irrigear Store Locator

Puretec® TankSafe™ Features & Benefits

Rainwater, carted water and water that is pumped up from bores and dams all have the potential to be unsafe. The Puretec® TankSafe™ formula can vastly improve the safety of these water supplies.

  • Safe alternative to harmful chemicals such as chlorine that leaves carcinogens in the water
  • Colourless & odourless – making it excellent for drinking water
  • Protect your tank water for up to 2 months – unlike chlorine which dissipates quickly
  • Low cost & non-toxic
  • Easy to use
  • Available in convenient 1, 2, 5 & 15 Litre sizes

Puretec® TankSafe™ Insructions for Tank Treatment

Pour the required amount of Purtec® TankSafe™ in your rainwater tank. Test 24 hours after dosing with TankSafe™ to ensure appropriate dosing has taken place. To check levels of protection after dosing, immerse a TankSafe™ test strip in the treated water for 2 sec and let the strip sit for 30 sec, then compare to the colour chart indicator. To ensure continuous safety, test a minimum of every 2-3 weeks or after a significant rainfall. Recommended dosage is 65 ml. per 1000 litres of tank volume, depending on the pollution grade. Follow the table below to find the correct dosage for your water volume. Requires 24 hour contact time. Amount of TankSafe™ Required:

  • 1,000L = 65ml
  • 5,000L = 330ml
  • 10,000L = 650ml
  • 32,000L = 2000ml
  • 80,000L = 5,000ml
  • 240,000L = 15,000ml

1L TankSafe™: TK1000
2L TankSafe™: TK2000
5L TankSafe™: TK5000
15L TankSafe™: TK15000

Safety Directions:

  • Not to be taken undiluted.
  • Use only as directed.
  • Avoid contact with skin and eyes.
  • Wash hands after use.
  • If swallowed, do not induce vomiting, seek medical advice immediately.
  • If skin contact occurs, flush with water.
  • If in eyes, hold eyes open and flush with water for 15 minutes and see a doctor if required.
  • Keep out of reach of children.

Storage:

  • Always store TankSafe™ and test strips in room temperature, clean, incombustible, lockable, well ventilated area.
  • Do not store it together with alkalis, reducing agents, metallic salts and combustible substances.
  • Do not store for prolonged periods in direct sunlight.
  • Replace cap after use.

Important Note: Sales of products are subject to Purete® Terms and Conditions which are available upon request. All specifications, prices and photos are a guide only and are subject to change without notice. Contact Puretec® confirm details.

Active components: Hydrogen Peroxide 7.9 %, Silver Nitrate <0.1 %

Puretec®

Perfecting Water.
Premium Manufacturer of Water Filtration Products.

Puretec® is dedicated to manufacturing a wide range of leading edge water filtration products and to provide unrivaled backup. All Puretec products come with class leading warranties, are of impeccable quality and are true to our tagline "Perfecting Water". With 30 years in the water filtration industry, Puretec remains a family owned, family run company with an unrivalled reputation for quality, innovation and reliability.


Puretec’s vision is to be the world’s best water purification manufacturer. The best means providing outstanding quality and value, leading innovation and continuous improvement, ‘Wow’ Customer service and the largest range through authorised distributors.

 
 

Available from your local Irrigear® Independent Experts. Find out more about Puretec® TankSafe™ Rainwater Tank Purifier – your solution for all types of stored water.

Irrigear®
Independent
Experts

GEARED
FOR BETTER
IRRIGATION®


Advice.
Products.
Solutions.
Australia-wide.

Call 1300 IRRIGEAR
1300 477 443
 

Share:

Find an Irrigear® store near you