Puretec® BoreSafe™ Iron Build-Up Bore & Pump Cleaners

Puretec® BoreSafe™ Iron Build-Up Bore & Pump Cleaners

Puretec® BoreSafe™ Iron Build-Up Bore & Pump Cleaners

The all new range of BoreSafe™ Iron Build-Up Bore and Pump Cleaners – products designed to treat different iron levels found in your bore water.

BoreSafe™ Eco is a non-corrosive, non-hazardous, biodegradable chemical designed specifically to break down the iron build-up in the bore itself, the bore pump and pipe. Ideal choice for those seeking to minimise hazardous chemical use around their home or workplace.

BoreSafe™ BLAST5 reduces iron deposits in bore water applications to help improve the flow through pipework and increase pump efficiency.

BoreSafe™ BLAST98 dissolves and removes iron deposits and stains in bores that haven’t been regularly maintained or have high iron levels. It is 20 times stronger than BoreSafe™ BLAST5 and is designed to blast away even the toughest iron contamination in bores and can also be used to remove iron staining on surfaces.

Why do I need BoreSafe™?
Unfortunately, many bore water supplies contain high levels of iron that build up in the bore and also the associated pumps and pipework. Symptoms are rusty-looking slime blocking your pipework, unpleasant odours, orange-brown staining and/or deposits. This reduces the flow of water out of the bore putting unnecessary strain on the pump and reducing its lifespan considerably. The iron in the water causing these flow issues means increased pump maintenance costs and downtime, increased power usage and obviously the reduced flow means any irrigation system is not as effective and pipework and sprinklers downstream become blocked.

Do I need BoreSafe™ in a new Bore?
If you have a bore with any iron in the water you should use BoreSafe™ regardless of whether it is an old or newly established bore. A new bore just needs a maintenance dose to ensure you minimise any build-up preserving your pump, reducing build-up in the pipework and saving electricity.

Advice. Products. Solutions. Australia-wide. Locally source and buy Puretec® products from the leaders in pumping, irrigation, filtration, water and fluid management – Irrigear® Independent Experts.

Which BoreSafe™ product do I buy?
With a complete range of BoreSafe™ products, you are sure to find the right solution for your specific requirements:

  • BoreSafe™ Eco - Light applications where users seek to minimise chemical use around their home & workplace.
  • BoreSafe™ BLAST5 - Solves general iron build-up issues and with regular use maintains bores.
  • BoreSafe™ BLAST98 - For bores that have not been regularly maintained or contain high levels of iron that need a stronger formula to break down build-up. BoreSafe™ BLAST98 is 20 x stronger than regular BoreSafe™ BLAST5.
Puretec® BoreSafe™ Iron Build-Up Bore & Pump Cleaners
Explore Puretec® Irrigear Store Locator

Puretec® BoreSafe™ – Features & Benefits

What makes it the right solution for you?
Puretec BoreSafe™
is a safe, easy-to-apply biodegradable chemical designed specifically to break down the iron build-up in the bore itself, the bore pump and the pipework. Boresafe™ breaks down the iron so that the water can flow freely again and it reduces the strain that blockages can put on your pump.

  • A fast and effective way to clean bores from iron oxide and bacteria buildup.
  • 3 formula options in a range of sizes to suit your needs.
  • ALL NEW BoreSafe™ BLAST98 is 20 x stronger than regular BoreSafe™ BLAST5 giving users more options to treat varying levels of build-up.
  • BoreSafe™ Eco is environmentally friendly - Biodegradable non-corrosive and non-hazardous.
  • With regular use, your bore can stay clean.

Puretec® BoreSafe™ – Product Codes & Pack Sizes

BoreSafe™ Product Codes


5L BoreSafe™ Eco: BE5000-E
20L BoreSafe™ Eco: BE20000-E


5kg BoreSafe™ BLAST5: BE-BLAST5-5KG
10kg BoreSafe™ BLAST5: BE-BLAST5-10KG
20kg BoreSafe™ BLAST5: BE-BLAST5-20KG


5kg BoreSafe™ BLAST98: BE-BLAST98-5KG
10kg BoreSafe™ BLAST98: BE-BLAST98-10KG
20kg BoreSafe™BLAST98: BE-BLAST98-20KG

Directions: BoreSafe™ Eco
(Available in 5L and 10L sizes):

1. Divert the discharge of the bore pipework back down the bore so the system recirculates (ensure this is done within the specs of the pump).

2. While the system is recirculating pour the correct amount of BoreSafe™ Eco down the bore.

3. Leave the system recirculating for 4-6 hours (the water may change to a green colour).

4. Leave the bore to rest for a minimum of 4 hours (optimal time is 24 hours).

5. Flush the system by moving the discharge away from the bore and ensure the water drains away from the bore. (BoreSafe™ Eco is biodegradable - however avoid foliage that could be damaged and areas that could be stained by dislodged iron).

6. Continue flushing for 10-20 minutes or until water is clear.

For safety instructions always read the product label. For any further information or instruction please contact Puretec.

Directions: BoreSafe™ BLAST5
(Available in 5kg, 10kg and 20kg sizes):

1. Check the pH of your water (non-critical step).

2. Dissolve the required amount of BoreSafe™ BLAST5 in a bucket(s) of water. For every kg of BoreSafe™ BLAST5 add 10 litres of water.

3. Divert the discharge of the bore pipework back down the bore so the system recirculates (ensure this is done within the specifications of the pump).

4. While the system is recirculating pour the dissolved BoreSafe™ BLAST5 down the bore. Leave the system recirculating for 6-8 hours.

5. Flush the system by moving the discharge line of treated bore water so it drains away from the bore (BoreSafe™ BLAST5 is biodegradable, however, avoid foliage and areas that could be damaged or stained by flush water discharge).

6. Continue to flush the system for a minimum of one hour after colour and odour disappear from the discharge line.

For safety instructions always read the product label. For any further information or instruction please contact Puretec.

Directions: BoreSafe™ BLAST98
(Available in 5kg, 10kg and 20kg sizes):

1. Check the pH of your water (non-critical step).

2. Dissolve the required amount of BoreSafe™ BLAST98 in a bucket(s) of water. For every kg of BoreSafe™ BLAST98 add 10 litres of water.

3. Divert the discharge of the bore pipework back down the bore so the system recirculates (ensure this is done within the specifications of the pump).

4. While the system is recirculating pour the dissolved BoreSafe BLAST98 down the bore. Leave the system recirculating for 6-8 hours.

5. Flush the system by moving the discharge line of treated bore water so it drains away from the bore (avoid foliage and areas that could be damaged or stained by flush water discharge).

6. Continue to flush the system for a minimum of one hour after colour and odour disappear from the discharge line.

For safety instructions always read the product label. For any further information or instruction please contact Puretec.

Puretec®

Perfecting Water.
Premium Manufacturer of Water Filtration Products.

Puretec® is dedicated to manufacturing a wide range of leading edge water filtration products and to provide unrivaled backup. All Puretec products come with class leading warranties, are of impeccable quality and are true to our tagline "Perfecting Water". With 30 years in the water filtration industry, Puretec remains a family owned, family run company with an unrivalled reputation for quality, innovation and reliability.


Puretec’s vision is to be the world’s best water purification manufacturer. The best means providing outstanding quality and value, leading innovation and continuous improvement, ‘Wow’ Customer service and the largest range through authorised distributors.

 
 

Available from your local Irrigear® Independent Experts. Find out more about Puretec BoreSafe™ Bore & Pump Cleaner and start saving money, hassle and downtime!

Irrigear®
Independent
Experts

GEARED
FOR BETTER
IRRIGATION®


Advice.
Products.
Solutions.
Australia-wide.

Call 1300 IRRIGEAR
1300 477 443
 

Share:

Find an Irrigear® store near you