Featured

AAP appFLO Butterfly Valves – Wafer, Lugged, Gear-Op

Butterfly Valves are used in a wide range of industries including water, wastewater treatment, food processing, HVAC, petrochemical as examples – offering a compact profile and give a bubble tight shut-off as well as having good regulating capabilities. Butterfly Valves are very useful where you have limited space and can utilise a quicker action – ¼ turn control to stop, start or regulate flow, rather than multi-turn gate valves. AAP offers Butterfly Valves with a range of body and seat options from Cast, Stainless Steel (SS), Ethylene Propylene Diene Monomer (EPDM), Nitrile Butadiene Rubber (NBR) or Viton® Seats. You are sure to find a material to suit your requirements.

AAP appFLO Green Handle Poly Ball Valves

Range of appFLO Green Handle Polypropylene Ball Valves come in a range of sizes from a ½ - 2” female BSP thread, and  incorporating a special feature unmatched by its competitors – the shaft is fitted with 2 O-rings of differing materials (EPDM and NBR).

Suitable to use in a wide range of industries including Water, Air, Chemicals, and Pumping.

AAP appFLO Resilient Seat Gate Valves

Resilient Seat Gate Valves are Gate Valves with an elastomer lined wedge. They are especially used for waste water, drinking water supply and irrigation. Also known as RSGV or RSG Valves, Resilient Seat Gate Valves have plain valve bottoms, allowing free passage for sand and pebbles in the valve. AAP appFLO Resilient Seat Gate Valves are availble in a wide range of sizes.

AAP Camlock (Cam & Groove) Fittings

AAP Camlock (Cam & Groove) Fittings to cover all your irrigation needs. Aluminium, Brass, Poly, Gal Mal, Stainless or NyGlass – we've got the fitting for you.

AAP Inline Spring & Swing Check Valves

Check Valves are used to ensure the flow direction in water, air and gas applications to prevent backflow in a piping system. The two most common styles of check valves are 'Spring' and 'Swing' Check Valves. Inline Spring and Swing Check Valves are used in a wide range of industries including Water, Air, Pumping as examples.

From a 10mm Inline Spring Check Valve to a 100mm Inline Swing Check Valve – AAP Industries have a range to look after your requirement’s and for the different applications.

AAP Peal® Pipe Pieces & Barrel Nipples

Black, Galvanised, Mild Steel and Stainless Steel Fittings. Convenient, easy to use, cost-effective and labour-saving pipe pieces, barrel nipples and close nipples – to be used as a pre-made replacement piece, extension, or repair piece of pipe to screw into new or existing pipelines. This reduces the labor costs in cutting and threading pipe – no threading machines needed.

AAP Rubber Bellow Expansion Joints

Rubber Bellow Expansion Joints a flexible connectors fabricated from natural or synthetic elastomers and fabrics with metallic reinforcments. These connectors are designed to provide stress relief in piping systems due to thermal changes. 

AAP Industries Rubber Bellows Expansion Joints are installed in piping and pumping systems to absorb movements in 3 directions:

1. Axial – The movement of elongation and compression along the center line.
2. Lateral – offset movement from the center line.
3. Angular – offset bending about the center line.

AIP Butterfly Valves

AIP Butterfly Valves are designed for easy installation on irrigation, civil and mining worksites. Made tough for Australian conditions AIP Butterfly Valves save valuable time and money. Available in a range of diameter sizes to suite a variety of applications.

AIP Travelflex® & Powaflex® Irrigation Hose

Travelflex® and Powaflex® are premium quality irrigation hose designed for use with travelling irrigators. Designed and manufactured tough for Australian conditions.

AIP Wellman Bore Hose – Flexible Rising Main

Light and flexible polyurethane layflat hose with drinking water approval, designed as a permanent alternative to traditional materials in water wells with electric submersible pumps, manufactured in Norway to exacting standards.

Wellmann Bore Hose Flexible Rising Main – a complete fwell riser main system consisting of the Wellman Hose, with special couplings, a submersible pump and power cables.

Antelco CFd® DownSpray

Featuring a 45° downspray pattern, the Antelco CFd® DownSpray reduces the effect of the wind and improves water efficiency. The downward spray pattern ensures only the surrounding soil gets watered, reducing water wastage and watering run times.

Expanded range to includes three new flow rate nozzle sizes. The range now boasts six flow rate sizes, each colour coded for easy identification. Ranging from 22 lph up to 136 lph (when operated at 100 kPa), the CFd® DownSpray has a flow rate to suit nursery plants from saplings through to established trees and shrubs.

Antelco Drippers / Adjustable Flow – Shrubbler® & Potstream®

Antelco Shrubbler® and Potstream® Adjustable Flow Drippers are ideal for home garden and light commercial use.

Antelco Pressure Compensating (PC) Drippers

A range of quality Pressure Compensating (PC) drippers that deliver a precise amount of water over a wide range of operating pressures. PC drippers facilitate controlled watering, as each dripper performs to a pre-set flow rate, allowing water emitted over a length of time to be easily calculated. This ensures more efficient watering, reducing the risk of over-watering or under-watering.

Antelco Rotor Max™ 180º Deflector

Easy Snap-on Field Fitted 180º Deflector for use with Antelco Rotor Max™ Midi Sprinklers. Ideally suited to end-of-row-sprinkler installations or to prevent overspray on roads and driveways, pathways, nursery walk-ways – or any application that requires directional water distribution. UV stabilsed materials ensure long life.

Antelco Rotor Mini & Midi Sprinklers

Antelco’s range of Rotor Sprinklers are ideal for greenhouses, nurseries, landscaping, home gardens and horticultural and agricultural applications. Available in three sprinkler ranges: Antelco Rotor Spray™ Mini; Antelco Rotor Rain® Mini; and Antelco Rotor Max™.