Featured

Featured

Featured

Irrigear® Independent Experts.

Show:

AAP appFLO Brass Ball Valves

AAP Industries General Purpose Brass Ball Valves in a Range of Sizes

Whether you need a General Purpose Brass Ball Valve through to an approved DR Brass Ball Valve you'll find an appFLO Ball Valve that will have your requirements covered.

View More

AAP appFLO Green Handle Poly Ball Valves

AAP Industries Multi-purpose Poly Ball Valves with Unique Double O-Rings (EPDM and NBR)

Range of appFLO Green Handle Polypropylene Ball Valves come in a range of sizes from a ½ - 2” female BSP thread, and  incorporating a special feature unmatched by its competitors – the shaft is fitted with 2 O-rings of differing materials (EPDM and NBR).

Suitable to use in a wide range of industries including Water, Air, Chemicals, and Pumping.

View More

AAP appFLO Resilient Seat Gate Valves

AAP Industries Quality Valves Built to Last

Resilient Seat Gate Valves are Gate Valves with an elastomer lined wedge. They are especially used for waste water, drinking water supply and irrigation. Also known as RSGV or RSG Valves, Resilient Seat Gate Valves have plain valve bottoms, allowing free passage for sand and pebbles in the valve. AAP appFLO Resilient Seat Gate Valves are availble in a wide range of sizes.

View More

AAP Camlock (Cam & Groove) Fittings

AAP Industries Range of Quality Fittings for All Your Needs

AAP Camlock (Cam & Groove) Fittings to cover all your irrigation needs. Aluminium, Brass, Poly, Gal Mal, Stainless or NyGlass – we've got the fitting for you.

View More

AAP Inline Spring & Swing Check Valves

AAP Industries Ensure Your Flow Direction

Check Valves are used to ensure the flow direction in water, air and gas applications to prevent backflow in a piping system. The two most common styles of check valves are 'Spring' and 'Swing' Check Valves. Inline Spring and Swing Check Valves are used in a wide range of industries including Water, Air, Pumping as examples.

From a 10mm Inline Spring Check Valve to a 100mm Inline Swing Check ValveAAP Industries have a range to look after your requirement’s and for the different applications.

View More

AAP Peal® Pipe Pieces & Barrel Nipples

AAP Industries Handy Easy to Use Pipe Pieces, Barrel Nipple & Close Nipple Fittings

Black, Galvanised, Mild Steel and Stainless Steel Fittings. Convenient, easy to use, cost-effective and labour-saving pipe piecesbarrel nipples and close nipples – to be used as a pre-made replacement piece, extension, or repair piece of pipe to screw into new or existing pipelines. This reduces the labor costs in cutting and threading pipe – no threading machines needed.

View More

AAP Rubber Bellow Expansion Joints

AAP Industries Premium Quality Expansion Joints Built to Last

Rubber Bellow Expansion Joints a flexible connectors fabricated from natural or synthetic elastomers and fabrics with metallic reinforcments. These connectors are designed to provide stress relief in piping systems due to thermal changes. 

AAP Industries Rubber Bellows Expansion Joints are installed in piping and pumping systems to absorb movements in 3 directions:

1. Axial – The movement of elongation and compression along the center line.
2. Lateral – offset movement from the center line.
3. Angular – offset bending about the center line.

View More

AcquaSaver® Water Diversion Valves

Brown Brothers Engineers (BBEA) Easy to Install. Low to No Maintenance. Solid Brass Construction. Built-in Dual Check Valves.

The AcquaSaver® Water Diversion Valve is a fully automatic mechanical rainwater/mains water changeover device designed for pressure pump supply systems for harvesting rainwater for the toilet, laundry and household applications with automatic mains backup. The AcquaSaver prioritises the use of rainwater over mains water when rainwater is available and will automatically switch over to mains water in the event of the rainwater tank running low or electrical failure. When rainwater has been replenished or power has been restored to the pump, the AquaSaver valve will automatically prioritize back to rainwater.

View More

AIP All Stainless Steel Permanent Repair Clamps

Advanced Industrial Products (AIP) • Full Circumference • Part Circumference • Full Junior Clamps

Designed for easy installation – why go to the expense of digging up and replacing a split pipe when you can simply use AIP All Stainless Steel Permanent Repair Clamps – saving you man power, time and money.

View More

AIP Butterfly Valves

Advanced Industrial Products (AIP) Australia's First Choice for Quality Hoses, Valves & Fittings

AIP Butterfly Valves are designed for easy installation on irrigation, civil and mining worksites. Made tough for Australian conditions AIP Butterfly Valves save valuable time and money. Available in a range of diameter sizes to suite a variety of applications.

View More

Antelco Green Back® & Purple Back® Valves

Antelco Australian Designed. Australian Made. Australian Owned.

Antelco’s range of Green Back® and Purple Back® Valves — designed and manufactured in Australia; built for quality. Antelco Green Back® and Purple Back® Valves are a simple on/off valve device to control the water flow in low pressure irrigation systems.

Green Back® and Purple Back®
Easily identifiable by their distinctive Green and Purple (for recycled water use only) button tops, these valves feature a large rounded top, ergonomically designed to fit comfortably in your hand making them easy to turn for on/off operation.

View More

Antelco Sprinklers / Agriculture – Rotor Rain® Plus Mini Sprinkler

Antelco High Performance Mini Sprinkler for Horticultural and Agricultural Applications

Antelco Rotor Rain® Plus High Performance Mini Sprinklers – part of a range of undertree and overhead mini sprinklers for horticultural and agricultural applications.

View More

Antelco Super Tough ST Fittings

Antelco LDPE fittings specifically engineered for use in agricultural installations

Antelco Super Tough ST Fittings are approximately double the strength of current single-barb polypropylene (PP) fittings and provide a better solution for vineyard, orchard and other agricultural installations. Suitable for most dripline configurations. UV stabilised. Based on proven single-barb fittings design.

View More

Iplex Nortite™ Ductile Iron Socket Fittings

Iplex Pipelines Ideal Partner For Series 1 UPVC Pipe – For All Irrigation Applications.

The Nortite range of Ductile Iron Socket Fittings is ideally suited to any application where AS/NZS1477 Series 1 UPVC pipe is to be used as the parent pipeline.

View More

Iplex Pipelines BlackMAX® Pipe & Fittings

Iplex Pipelines Polypropylene (PP) Stormwater Pipe & Fittings

BlackMAX® is a cost-effective alternative to rigid stormwater drainage pipes providing exceptional performance and durability. Manufactured from polypropylene, BlackMAX® pipes are resistant to corrosive and aggressive ground conditions, such as acid sulphate soils or saline ground waters; resulting in increased longevity of the pipeline.

The profile wall structure provides an efficient use of material, producing a pipe with high ring stiffness and low mass. As a result, BlackMAX® pipes are only a fraction of the weight of conventional materials and can readily withstand both installation and service
loads.

View More

Maric Constant Flow Valves

Maric Flow Control For Constant Flow, Regardless of Pressure

By limiting peak flow rate, these Maric Constant Flow Valves will keep flow rate within the pump manufacturers specifications. A constant flow rate, even while demand for water, or upstream or downstream pressures are changing, can offer valuable protection for flow rate sensitive equipment and water distribution systems.

View More

NDS Telescopic Pro Span Couplings

NORMA Pacific The Ideal Connection for Repairing Broken PVC Pipe

NDS Telescopic Pro Span Couplings have an innovative design to make installation easier and lasting. They come in sizes from 15mm up to 100mm to ensure you have a fitting for every application. With an impressive pressure rating above the competition, it should be the only fitting on your mind when thinking of PVC telescopic.

View More

Neta Brass Garden Hose & Tap Fittings

Neta Australia Nothing Rivals the Elegance & Durability of Neta Brass Fittings

Neta Brass Garden Hose Fittings are guaranteed for 20 years and are designed to suit Australian and New Zealand conditions. Available in 12mm or 18mm and manufactured using solid brass, there is a Neta hose fitting for every watering application. Customers can choose from the Neta range of brass fitted hoses or retrofit brass fittings onto an existing garden hose.

View More

Neta Nozzles Guns & Wands

Neta Australia Quality Solutions for Every Type of Garden Watering Need

The Neta range of durable UV stabilised plastic, solid brass and metal nozzles, spray guns, jet guns and wands offer reliable watering solutions suited to the Australian climate. Backed by the Neta No Break Guarantee, there are options for every type of gardening need.

View More

Neta Plastic Fittings

Neta Australia High-Quality Garden Hose Fittings. Durable, Robust and Functional

Neta Plastic Garden Hose Fittings are made in Australia and are backed by the Neta ‘No Break 5 Year Guarantee’. Available in 12mm or 18mm profiles and made with UV stabilised materials, these high-quality Garden Hose Fittings are durable, robust and functional.

View More

NORMA IBC Tank Connectors

NORMA Pacific Perfect Connectors for IBC Tanks - Dual Viton O'rings to ensure excellent chemical compatibility

NORMA"NIBC50" IBC Tank Connectors are simply the best IBC tank adapter in the market – Adaptable, Chemical Resistant Washers, Water-tight Seal, Chemical Resistant Body.

View More

NORMA® Rural Telescopic Pipe Compression Fittings

NORMA Pacific The Ideal Connection for Repairing & Tapping Into Rural PE Pipe.

Manufactured with a high level of quality for product peace of mind. These fittings are UV stabilised to ensure they will continue to perform, even in harsh sunlight conditions, and are the ideal connection for repairing and tapping into rural PE pipe. NORMA® Rural Telescopic Compression Fittings are easily identified as a rural compression fitting by having green ends. These ends are also interchangeable with the NORMA metric fittings. There are a large range of sizes and configuration to cover most types of installation.

View More

NORMAClamp® TORRO® Worm Drive Hose Clamps

NORMA Pacific German-made Quality & Reliability

TORRO® Clamps are deally suited to applications with high mechanical loads. Continuous development ensures TORRO® remains the benchmark in modern clamp construction. The key feature is its asymmetrical construction - an instant sign that it's a genuine TORRO®.

View More

Philmac 3G® Metric Compression Fittings

Philmac Australia Philmac 3G Metric Fitting Range – Simply Slide and Tighten™ for a Reliable Connection Every Time

The ideal solution for the perfect connection every time thanks to Philmac’s unique Slide and Tighten™ technology.

Each fitting is pre-assembled and ready to use so there’s no need to disassemble the fittings or prepare the pipe prior to use. Simply cut the PE pipe square and slide it into the fitting until you feel the first point of resistance and then tighten the nut to the flange on the body of the fitting. With Philmac 3G® Metric Compression Fittings, just slide and tighten and the job’s done!

View More

Philmac Ball Valves – You Can't Beat the Original

Philmac Australia Proven Performance. Robust Construction. Easy to Install.

Philmac Ball Valves with its distinctive blue-handle design has been serving the Australian market for over 30 years. Robust construction and easy to install with positive on/off Visual Indicator.

View More

Search

Recommended

Product Categories


Solutions


Brands


Find an Irrigear® store near you