Featured

AAP appFLO Brass Ball Valves

Whether you need a General Purpose Brass Ball Valve through to an approved DR Brass Ball Valve you'll find an appFLO Ball Valve that will have your requirements covered.

AAP appFLO Green Handle Poly Ball Valves

Range of appFLO Green Handle Polypropylene Ball Valves come in a range of sizes from a ½ - 2” female BSP thread, and  incorporating a special feature unmatched by its competitors – the shaft is fitted with 2 O-rings of differing materials (EPDM and NBR).

Suitable to use in a wide range of industries including Water, Air, Chemicals, and Pumping.

AAP appFLO Resilient Seat Gate Valves

Resilient Seat Gate Valves are Gate Valves with an elastomer lined wedge. They are especially used for waste water, drinking water supply and irrigation. Also known as RSGV or RSG Valves, Resilient Seat Gate Valves have plain valve bottoms, allowing free passage for sand and pebbles in the valve. AAP appFLO Resilient Seat Gate Valves are availble in a wide range of sizes.

AAP Camlock (Cam & Groove) Fittings

AAP Camlock (Cam & Groove) Fittings to cover all your irrigation needs. Aluminium, Brass, Poly, Gal Mal, Stainless or NyGlass – we've got the fitting for you.

AAP Inline Spring & Swing Check Valves

Check Valves are used to ensure the flow direction in water, air and gas applications to prevent backflow in a piping system. The two most common styles of check valves are 'Spring' and 'Swing' Check Valves. Inline Spring and Swing Check Valves are used in a wide range of industries including Water, Air, Pumping as examples.

From a 10mm Inline Spring Check Valve to a 100mm Inline Swing Check Valve – AAP Industries have a range to look after your requirement’s and for the different applications.

AAP Peal® Pipe Pieces & Barrel Nipples

Black, Galvanised, Mild Steel and Stainless Steel Fittings. Convenient, easy to use, cost-effective and labour-saving pipe pieces, barrel nipples and close nipples – to be used as a pre-made replacement piece, extension, or repair piece of pipe to screw into new or existing pipelines. This reduces the labor costs in cutting and threading pipe – no threading machines needed.

AAP Rubber Bellow Expansion Joints

Rubber Bellow Expansion Joints a flexible connectors fabricated from natural or synthetic elastomers and fabrics with metallic reinforcments. These connectors are designed to provide stress relief in piping systems due to thermal changes. 

AAP Industries Rubber Bellows Expansion Joints are installed in piping and pumping systems to absorb movements in 3 directions:

1. Axial – The movement of elongation and compression along the center line.
2. Lateral – offset movement from the center line.
3. Angular – offset bending about the center line.

AcquaSaver® Water Diversion Valves

The AcquaSaver® Water Diversion Valve is a fully automatic mechanical rainwater/mains water changeover device designed for pressure pump supply systems for harvesting rainwater for the toilet, laundry and household applications with automatic mains backup. The AcquaSaver prioritises the use of rainwater over mains water when rainwater is available and will automatically switch over to mains water in the event of the rainwater tank running low or electrical failure. When rainwater has been replenished or power has been restored to the pump, the AquaSaver valve will automatically prioritize back to rainwater.

AIP All Stainless Steel Permanent Repair Clamps

Designed for easy installation – why go to the expense of digging up and replacing a split pipe when you can simply use AIP All Stainless Steel Permanent Repair Clamps – saving you man power, time and money.

AIP Butterfly Valves

AIP Butterfly Valves are designed for easy installation on irrigation, civil and mining worksites. Made tough for Australian conditions AIP Butterfly Valves save valuable time and money. Available in a range of diameter sizes to suite a variety of applications.

Antelco Green Back® & Purple Back® Valves

Antelco’s range of Green Back® and Purple Back® Valves — designed and manufactured in Australia; built for quality. Antelco Green Back® and Purple Back® Valves are a simple on/off valve device to control the water flow in low pressure irrigation systems.

Green Back® and Purple Back®
Easily identifiable by their distinctive Green and Purple (for recycled water use only) button tops, these valves feature a large rounded top, ergonomically designed to fit comfortably in your hand making them easy to turn for on/off operation.

Antelco Sprinklers / Agriculture – Rotor Rain® Plus Mini Sprinkler

Antelco Rotor Rain® Plus High Performance Mini Sprinklers – part of a range of undertree and overhead mini sprinklers for horticultural and agricultural applications.

Antelco Super Tough ST Fittings

Antelco Super Tough ST Fittings are approximately double the strength of current single-barb polypropylene (PP) fittings and provide a better solution for vineyard, orchard and other agricultural installations. Suitable for most dripline configurations. UV stabilised. Based on proven single-barb fittings design.

Iplex Nortite™ Ductile Iron Socket Fittings

The Nortite range of Ductile Iron Socket Fittings is ideally suited to any application where AS/NZS1477 Series 1 UPVC pipe is to be used as the parent pipeline.

Iplex® BlackMAX® Stormwater Pipes & Fittings

Iplex® BlackMAX® is a cost-effective alternative to rigid stormwater drainage pipes providing exceptional performance and durability. Manufactured from polypropylene, BlackMAX® pipes are resistant to corrosive and aggressive ground conditions, such as acid sulphate soils or saline ground waters; resulting in increased longevity of the pipeline.

The profile wall structure provides an efficient use of material, producing a pipe with high ring stiffness and low mass. As a result, Iplex BlackMAX pipes and fittings are only a fraction of the weight of conventional materials and can readily withstand both installation and service loads.

• Proudly manufactured in Australia
• Built to last
• Efficient water movement
• Easy installation
• Safer to use